
MIG, TIG and fabrication for business
Welding shop for metal parts and small runs in Utah
47 Welding LLC welds steel and aluminum parts in our own shop for manufacturers, equipment builders and product teams across western Utah County and nearby communities.
- In-shop onlyEvery part welded on our tables
- Drawing reviewed firstQuestions asked before we quote
- Quote in writingScope set before any metal is cut
- Weekdays 7 to 6Saturday and Sunday closed
Processes
Five ways a part goes across our table
Two arc processes, two main metals and custom work that combines them. Pick the one closest to your part, or leave it to us: we choose after we see the drawing.
-
01
MIG weldingProcess
Wire-fed welding for steel brackets, mounts, frames and repeat parts where steady output matters.

-
02
TIG weldingProcess
Slow, controlled welding for thin material, aluminum and joints that will be seen.

-
03
Steel weldingMaterial
Mild steel brackets, guards and equipment frames, welded by MIG or TIG to suit the part.

-
04
Aluminum weldingMaterial
Light parts in aluminum sheet and plate, mostly TIG welded with careful cleaning.

-
05
Custom weldingOrder
One-off parts and prototypes built from your drawing, sketch or sample, then small runs.

Bead simulator
Why we set the machine to the part
Two things shape every weld bead: how much heat goes in and how fast the torch travels along the joint. Move the sliders to see what happens to the bead. The words are deliberate; real settings depend on the metal, its thickness and the joint.
Bead shape
Even
Heat and travel speed in balance. The bead flows into both edges with a smooth, even ripple and a slight crown.
Where it fits: The target for most brackets, frames and mounts. This is where we aim when we set up a batch.
Who we work with
Built for businesses that need parts made
We weld for companies. If your business designs, builds, sells or maintains equipment, this is the kind of work we take on every week.
Manufacturers
Brackets, guards and subassemblies for your product line, from a first part to repeat batches.
Machine shops
Welding for parts you machine before or after, so the work stays on schedule between shops.
Equipment builders
Frames, mounts and covers for machines you design and assemble.
Startups and product designers
Prototypes from a sketch or CAD file, then small runs once the design settles.
Distributors
Matching sets of welded parts and kits that go out under your own product name.
Maintenance teams
Replacement guards, covers and brackets for the equipment you keep running.
How a job runs
From drawing to finished part in six stages
The same path for a single prototype or a run of fifty. Nothing gets cut until the quote is approved. Read the full walkthrough
- 01
Drawing or sample
Send what you have: a drawing, a sketch with dimensions, photos or a sample part. Email files after the form so we can see the details.
- 02
Review and questions
We go through the drawing or sample, check material and thickness, and look at each joint. If something is unclear, we ask before we quote.
- 03
Written quote
You get the scope in writing before any work starts: material, process, quantity, finish and what we need from you.
- 04
Cut, prep and fit-up
Stock is cut and cleaned, edges are prepared and pieces are fitted and tacked on the table or in a jig.
- 05
Weld and finish
The main welds go down in a planned order to keep the part straight. Spatter is removed and the finish is done as quoted.
- 06
First article and pickup
For runs, the first part is set aside for you to look over. Finished parts are ready for pickup at the shop during weekday hours.

The shop
One bay, two tables, steady work
Our shop is a single wide bay at the foot of the mountains in western Utah County. Material comes in one side, gets cut and cleaned, moves to the tables for fit-up and welding and leaves through the big door as finished parts. Keeping it small means every job is in plain sight.
Customers from western Utah County and nearby communities drop off samples, pick up parts and stop by to talk through a drawing on weekdays. Others send everything by email and only come by for pickup. Either way, the welding happens here, where the tables, fixtures and conditions are set up for it.
Questions
Before you send a part
Short answers to what businesses ask us first. For anything else, call the shop during weekday hours.
What kinds of customers do you work with?
Businesses: manufacturers, machine shops, equipment builders, product designers and maintenance teams. Every job we take is for a business.
Do you weld one-off parts or only runs?
Both. Many jobs start with one prototype and turn into a small run once the part is approved.
Which metals do you weld?
Mostly mild steel and aluminum, plus small stainless parts. If you are not sure what your part is made of, send a photo.
How do we get a quote?
Send the form with a short description, then email your drawing or photos. We review them and reply with a written quote.
Have a drawing on your desk?
Send the form with a short description, then email the drawing, sketch or photos. We review the part and reply with a written quote.